Socket Mobile Bluetooth iPAQ Bedienungsanleitung

Cordless Hand Scanner Series 7 with Bluetooth® Wireless Technology User’s Guide

Status Indicator LED LED LED Activity Meaning 1 blink per second Bluetooth radio is on, but not connected. Bluetooth Status (Blue) 1 blink per 3 s

SYMPTOM: While scanning with the CHS, I turned off the Pocket PC, or my Pocket PC entered suspend mode. Now my Pocket PC won’t turn on again. POSSIBL

APPENDIX G: TROUBLESHOOTING 101 SYMPTOM: While scanning with the CHS, I turned off the Pocket PC, or my Pocket PC entered suspend mode. Now the CHS w

APPENDIX H TECHNICAL SUPPORT If you have trouble installing or using the CHS, Socket has different support options to help you. Online Knowledge B

LIMITED WARRANTY Socket Mobile Incorporated (Socket) warrants this product against defects in material and workmanship, under normal use and service,

the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary

LIMITED SOFTWARE WARRANTY LIMITED WARRANTY. SOCKET MOBILE, INC. (Socket) warrants that the original disk or CD ROM is free from defects for 90 days fr

CONTROLLING LAW AND SEVERABILITY. This License shall be governed by the laws of the United States and the State of California. If for any reason a cou

REGULATORY COMPLIANCE The Socket Cordless Hand Scanner is designed to be compliant with the rules and regulations in locations where they are sold a

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may c

Canada Certification The marking of “IC:2394A-CHS1” on the device means: “2394A-CHS1” is the certification number, and the term “IC’ before the equipm

2 | HARDWARE PREPARATION INSTALLING BATTERIES AND ATTACHING THE TETHER 1. Use a coin or screwdriver to unlock and remove the battery cover. Turn th

For the Class 1 version of this engine (CHS 7M), the following applies: • Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to La

A label such as the one below should appear on the end product. Example of Class 2 Laser Warning Label Battery Warning: • Your device contains a

11/2008 Printed in U.S.A.

4. Install the batteries as indicated by the +/- symbols. WARNING: Do not install the batteries incorrectly. Damage may result. 5. Replace the ba

ASSEMBLING THE AC ADAPTER The AC adapter included with the CHS includes four international plugs. Simply find the correct plug for your region and sli

3 | SETUP FOR WINDOWS MOBILE This chapter explains how to install and use the Cordless Hand Scanner (CHS) with the SoMo 650 or other Bluetooth enabl

STEP 1: UNINSTALL OTHER SCANNING SOFTWARE Remove any bar code scanning software already installed on your device. Note: The SocketScan software pre-i

STEP 2: INSTALL SOCKETSCAN AND CONNECT!AGENT Follow these instructions to install SocketScan and Connect!Agent software into your Pocket PC. Both are

5. In the SocketScan installation page, in the Windows CE section, click Install In the first paragraph. 6. Your web browser will present a serie

8. After installing the software, a dialog on your Pocket PC will direct you to soft reset. Tap ok. 9. Remove your device from the cable/cradle a

STEP 3: START SOCKETSCAN 1. Tap Start | Programs | SocketScan folder | SocketScan. 2. When SocketScan is running a SocketScan icon will appear

11/2008 Document # 6410-00233 R COPYRIGHT NOTICE Copyright © 2008 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, Battery Friend

3. Check the box Enable Cordless Scanner support. IMPORTANT!!! 4. Tap on the CS HW tab. Enter the following settings: • Good Read Indicator

STEP 5: TURN ON THE CHS Press and hold the small power button for 3 seconds, until the LED turns blue and the scanner beeps. The LED should blink b

- If you have previously connected to a CHS, Connect!Agent will automatically search for your favorite (default) device. 3. If Connect!Agent does

4. Connect!Agent will begin connecting to the CHS. 5. After the devices connect, the CHS will beep once. The SocketScan icon at the bottom of the

STEP 8: SCAN DATA INTO YOUR APPLICATION 1. Press the trigger button and scan the bar code. When data is read and sent to device, the scanner will

SocketScan Auto-Reconnect If your mobile device suspends or the CHS moves out of range, the connection will end. After the mobile device turns on agai

SYMBOLOGY SELECTOR 1. Tap on the SocketScan icon. In the pop-up menu, tap Symbology Selector... 2. In the screen, check the symbologies you wish

SCANNER SETTINGS 1. Tap on the SocketScan icon. In the pop-up menu, tap Settings. 2. Enter characters append to each scan (128 character maximum).

SCAN DEMO Scan Demo makes it easy to determine the symbology, number of characters, and decoded data (in either ASCII or Hex) of any bar code supporte

CONNECT!AGENT UTILITY The Connect!Agent utility enables you to view and change the default Socket Bluetooth peripherals for Connect!Agent. 1. Tap St

TABLE OF CONTENTS COPYRIGHT NOTICE 2 1 | INTRODUCTION 6 Scanner Versions 6 About the Software 6 Package Contents 7 System Compatibility Requirements

3. If you wish to remove a device from the partnership list, select the device and tap Delete. In the confirmation screen, tap Yes. DUAL DEVICE SUP

4 | SETUP FOR THE INTERMEC CK30 This chapter explains how to install and use the Cordless Hand Scanner (CHS) with the Intermec CK30 mobile computer,

STEP 1: INSTALL CONNECT!AGENT AND SOCKETSCAN You must install both SocketScan and Connect!Agent. 1. Use ActiveSync (4.0 or greater), the Windows Mo

5. Select the CE.Connect!Agent.160s.ARM… CAB file and press the Enter button on the right side. 6. In the options window, select Run and press th

STEP 3: START SOCKETSCAN 1. On the CK30, press the green button and then the orange button to access the System Main Menu. 2. In the System Main Me

- If this is your first time connecting to a CHS from this CK30, Connect!Agent will begin searching for any CHS in range. - If you have previously

STEP 5: OPEN YOUR APPLICATION 1. Start the Windows application that you want to receive the data (e.g., Word Pad). Make sure a document is open. 2

If your CK30 suspends or the CHS moves out of range, the connection will end. After the mobile device turns on again or returns in range, SocketScan w

SYMBOLOGY SELECTOR The SocketScan utility makes it easy to choose which symbologies you want the scanner to recognize. 1. In the SocketScan menu, pr

PREFIXES/SUFFIXES The SocketScan utility lets you specify prefix and/or suffix characters to be added automatically to the data you scan. This helps t

Symbology Selector 38 Prefixes/Suffixes 39 Power Settings 40 5 | SETUP FOR WINDOWS XP AND VISTA 41 STEP 1: Uninstall Other Scanning Software 42 STE

POWER SETTINGS The SocketScan utility lets you manage the power settings of the CHS. 1. Make sure the CHS is connected to the CK30. 2. In the Soc

5 | SETUP FOR WINDOWS XP AND WINDOWS VISTA This chapter explains how to install and use the Cordless Hand Scanner (CHS) with a Bluetooth enabled com

STEP 1: UNINSTALL OTHER SCANNING SOFTWARE Uninstall any bar code scanning software already installed in your computer, including previous versions of

5. In the SocketScan Installation page, scroll down to the Windows XP and Windows Vista section and click on the Install link there. 6. Your web

8. During installation, a message will warn that the software is unsigned. • Windows XP: Click Continue Anyway. • Windows Vista: Click Install thi

STEP 4: START BLUETOOTH ON YOUR COMPUTER 1. If you are using an add-on Bluetooth card or adapter, such as the Socket Scanning Companion USB adapter,

Microsoft Bluetooth Stack: 1. Right-click on the Bluetooth icon in the task tray. In the pop-up menu, click Add a Bluetooth Device. . 2. The Add B

4. In the passkey options screen, select Use the passkey found in the documentation and enter the default PIN 1234. 5. Your computer will exchan

Toshiba Bluetooth Stack: 1. Double-click on the Bluetooth icon at the bottom of your screen. 2. In Bluetooth Settings, tap New Connection. 3. T

6. In the list of device services, select Serial Port. Click Next. 7. In the next screen, uncheck Use default COM port. Click Next.\ 8. The s

5 Scanner Settings 81 CS Bonding 82 Version Information 82 APPENDICES A SPECIFICATIONS 83 B SAFETY AND USAGE TIPS 87 C BAR CODE LABEL SPECIFICA

9. Select another COM port. If desired, check Auto Connect. Click Next. WARNING! Do not select a COM port that is used by another device on your sy

Broadcom (Widcomm) Bluetooth Stack: 1. Perform a Quick Connect to a Bluetooth Serial Port. Click the Bluetooth icon in the task tray. Click Quick Co

STEP 6: START SOCKETSCAN Double-click on the SocketScan icon on your desktop. STEP 7: CONFIGURE SCANNER SETTINGS 1. Click the SocketScan icon in

• Port: Select the outgoing COM port number for the CHS. • Good read indication on CS: Select how you would like the CHS to indicate that it has

STEP 8: CONNECT COMPUTER TO CHS 1. Right-click the SocketScan icon at the bottom of the screen and click Connect CS. After you configure the cor

STEP 9: OPEN YOUR APPLICATION 1. Start the application that you want SocketScan to feed scanned data into. Make sure a document or spreadsheet is op

SocketScan Auto-Reconnect If your computer suspends or the CHS is moved out of range, the connection will be lost. After the computer turns on again o

SCANNER SETTINGS You can configure these settings whether or not the CHS is connected to your computer. 1. In SocketScan Settings, click on the G

ADVANCED BLUETOOTH SETTINGS The SocketScan utility enables you configure advanced Bluetooth settings of the CHS, including the Bluetooth friendly name

4. If desired, select Friendly Name or Security and click Change. 5. In the screen that appears, enter any changes and click OK. CHS Friendly Na

1 | INTRODUCTION Thank you for purchasing the Socket Cordless Hand Scanner (CHS) Series 7 with Bluetooth Wireless Technology. The CHS combines the po

If desired, click Delete Bonding to delete any bonding/pairing information in the CHS. After making any changes, click OK. 6. If you modified any se

REMOTE TRIGGER BUTTON The SocketScan utility enables you to assign one of your computer’s function keys to trigger the CHS. 1. In SocketScan Settin

SYMBOLOGY SELECTOR The SocketScan utility makes it easy to modify which symbologies you want the scanner to recognize and decode. 1. In SocketScan S

VERSION INFORMATION 1. In SocketScan Settings, click on the About tab. 2. View the version information. If the PC is connected to a CHS, the contro

6 | SETUP FOR PALM OS This chapter explains how to install and use the Cordless Hand Scanner (CHS) with a Bluetooth enabled device running Palm OS 5

STEP 1: UNINSTALL OTHER SCANNING SOFTWARE Uninstall any bar code scanning software already installed in your device, including previous versions of So

5. In the SocketScan Installation page, scroll down to the Palm OS section and click the Install link there. 6. Your web browser will present a s

STEP 3: TURN ON THE CHS Press and hold the small power button for 3 seconds, until the LED turns blue and the scanner beeps. The LED should blink blu

STEP 5: CONNECT CHS TO PDA WITH BLUETOOTH 1. After you start SocketScan, the main screen of SocketScan will appear, showing a picture of the Socket S

4. Your device will begin searching for Bluetooth enabled devices in range. After it finishes searching, select the Socket CHS from the list of disco

PACKAGE CONTENTS • Cordless Hand Scanner with Bluetooth Wireless Technology • AC charging adapter with international plugs • 2 NiMH rechargeable AA

If the CHS is taken out of range, or if the Bluetooth connection is otherwise lost, to resume operation you must enable it again in SocketScan. For m

STEP 7: SCAN DATA INTO YOUR APPLICATION 1. Press the trigger button and scan the bar code. When data is read and transmitted to the host, the sc

SCANNER SETTINGS 1. Make sure the main screen of SocketScan reports that the CHS is enabled. Tap Configure. You can configure prefix/suffixes wh

• Keep PDA alive for: Select how long you would like the PDA to stay alive after the last scan. This feature allows you to scan data for several hour

For example, if you already scanned three lines of data into Memo, the next data you scan will appear on the fourth line, even if you place the cursor

SCAN TEST SocketScan includes a Test feature that makes it easy to determine the symbology, number of characters, and decoded data (in either ASCII or

7 | SETUP FOR RIM BLACKBERRY This chapter explains how to install and use the Cordless Hand Scanner (CHS) with a RIM BlackBerry® Bold™, Curve™ or Pe

STEP 1: INSTALL SOCKETSCAN SOFTWARE This User’s Guide covers two methods for installing SocketScan software: downloading to the smartphone and synchro

8. Select the checkbox for SocketScan and click Next. 9. Click Finish. 10. After the software finishes loading, click Close. STEP 2: TURN ON THE

STEP 4: START SOCKETSCAN 1. In the Home Screen, click SocketScan. For some smartphones, the SocketScan icon appears in the Downloads folder. You may

RIM BlackBerry: • Any of the following devices: − Curve 83xx − Pearl 81xx − Bold 9000 For instructions on using the CHS with a smartphone runnin

STEP 7: SCAN DATA INTO YOUR APPLICATION 1. Press the trigger button and scan the bar code. When data is read and transmitted to the smartphone,

SYMBOLOGY SELECTOR The feature makes it easy to modify which symbologies you want the scanner to recognize. By default, the scanner is set to recogniz

82 • Good Scan Beep: Select to have the CHS beep to indicate that data was successfully decoded and transmitted to the smartphone. • Good Scan LED:

APPENDIX A SPECIFICATIONS Physical Characteristics Size: 125l x 31h x 35w (mm) 4.9l x 1.2h x 1.4w (in.) Total Mass: approx. 90 g (0.2 lb) Power S

• Windows Vista Business/Ultimate (SP1) • Palm OS 5.2 and later • RIM BlackBerry OS for Curve, Bold, Pearl smartphones For information about using

Decode Distance (depends on symbol size, symbology, label media, W-N Ratio, scan angle) • CHS 7E: 1.5 to 8 inches (3.8 to 20 cm) typical • CHS 7M: 1

86 distances from 18 to over 100 feet have been experienced depending on the environment. The following conditions appear to reduce the Bluetooth co

APPENDIX B SAFETY AND USAGE TIPS About Bluetooth and Health Bluetooth wireless technology allows you to use short-range radio signals to connect a

88 • Changes or modifications of this product, not expressly approved by Socket, may void t

99/519/EC, EU Council Recom

HARDWARE FEATURES Product Diagram Status indicator LED Scanner exit window Trigger button Power button Battery cover Stylus tip Rechargeable Bat

APPENDIX C BAR CODE LABEL SPECIFICATIONS All bar code symbols/labels should satisfy the appropriate AIM Uniform Symbology Specification. Background

APPENDIX C: BAR CODE LABEL SPECIFICATIONS 91 Tolerance: The ratio of the widths of bars and spaces in a bar code symbol must conform to the appropria

APPENDIX D ENABLING OR DISABLING SYMBOLOGIES The CHS is pre-set to automatically detect and decode (auto-discriminate) the most common bar code symb

APPENDIX D: ENABLING/DISABLING SYMBOLOGIES 93 Table 2. Other Symbology Parameters Symbology Parameters Scanner Default UPC/EAN/JAN Supplementals D

APPENDIX E DECODE ZONE The decode zones for the Cordless Hand Scanner are shown below. The minimum element width (“X Dimension” or bar code “size”

CHS 7M APPENDIX E: DECODE ZONE 95

CHS 7P 96

APPENDIX F RESTORING FACTORY DEFAULTS To restore the CHS to its factory defaults, do the following: 1. Turn on the CHS. Make sure the CHS does no

APPENDIX G TROUBLESHOOTING For help on SocketScan, tap Start | Help on a Pocket PC, or tap on the icon on a Palm device. SYMPTOM: I get the “No Sc

SYMPTOM: When I scan a lot of bar codes very fast, the scanner locks up and won’t work for a few seconds. POSSIBLE REASONS SOLUTION You are scanning